A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

An unexpected Pummerer rearrangement in the synthetic route to ethyl (2′-hydroxy-4′,5′-methylenedioxyphenyl)acetate: An alternative approach to 2,3-dimethylthio benzofurans

The synthesis of ethyl (2′-hydroxy-4′,5′-methylendioxophenyl)acetate, a fragment of the antihyperglycemic natural coumarin subcoriacin, is reported. We found an expeditious route to the title compound in five steps. Final metal catalyzed acid ethanolysis of the vinylic 1,1-methylthio methylsulfoxide derivative afforded the required aryl acetic ester, but in the absence of metal catalyst, an unexpected Pummerer rearrangement produced the 2,3-dimethylthiofuran derivative as the major product. This last result provides an alternative entry to 2,3-dimethlythiobenzofurans.     

Synthesis and antifungal activity of carvacrol and thymol esters with heteroaromatic carboxylic acids

Aiming to obtain the more effective pathogen inhibitive ingredients and explore the influence of introducing different heterocyclic units to carvacrol and thymol esters, twenty ester derivatives with different heterocyclic units were synthesized. And the in vitro antifungal activity of title compounds against five plant pathogenic fungi was evaluated by mycelium growth rate method. The results showed that some carvacrol and thymol esters showed good to excellent antifungal activity, and compound 9d (4-bromo-5-isopropyl-2-methylphenyl picolinate) exhibited a broad antifungal spectrum. Preliminary study indicated that the introduction of furan, thiophene and pyridine unit could enhance the antifungal activity of carvacrol and thymol esters against Botrytis cinerea and a bromine atom on the para position of benzene moiety could enhance their antifungal activity.     

Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

Structure and Mechanical Stability of Epoxy Modified Polyurethane Foam Under Heat and Stress

A series of phenolic epoxy resin (PEP) modified polyurethane foams (PUF) were prepared via an in-situ polymerization, one step process. It was found that the epoxy modified PUF foam exhibited a perforated network structure with larger cell size, higher open cell porosity and enhanced ovality compared with pure PUF. With increasing content of PEP, the tensile strength, elongation at break and low temperature modulus of PUF decreased. A single T_g was observed for PEP modified PUF, indicating that the two component phases of the polyurethane-epoxy were miscible. With increasing PEP content, the T_g of PUF shifted slightly to higher temperature, tan δ_max dropped to lower values, and the retention value of the storage modulus at ?20 and ?10?°C increased. For pure PUF, the cell walls degraded and the structure became disordered after aging under heat and stress, while for PUF/20wt%PEP, the degradation degree was obviously reduced, and an orientation of the cells along the stress direction and a density increase was observed. During aging at 200?°C, the retention of the mechanical properties of PUF/20wt% PEP was much higher than that of pure PUF, and it showed superior stability under heat and stress, attributed to incorporation of the thermally resistant oxazolidone rings and benzene rings in the PU backbones, the highly cross-linked networks of the polyurethane-epoxy systems and the obvious orientation of the cells under stress.     

Influence of the PVOH molar mass on the morphology and functional properties of EVOH/PVOH films prepared by melt blending

The influences of the molar mass (low, medium, and high) and content of poly(vinyl alcohol) (PVOH) dispersed by melt-blending in an ethylene vinyl alcohol (EVOH) copolymer on the morphology, microstructure, thermal, mechanical, and oxygen barrier properties were investigated. Multilayer films with external low-density polyethylene layers and inner EVOH/PVOH blend layer and respective monolayer films were elaborated and characterized. EVOH/PVOH blends exhibited a good compatibility because of the initial presence of PVOH segments in EVOH. The detailed quantitative analysis of the morphology performed for all blends showed that the finest dispersion was obtained with the PVOH with the lowest molar mass. The properties of the films as a function of the PVOH content and its molar mass were determined herein. Significant improvement of barrier properties was obtained at moderated water activities (up to a_w = 0.6) by using the PVOH with the lowest molar mass. Compared to the neat EVOH material, the oxygen permeability coefficients decreased by a factor 2 by adding 15 vol% PVOH while the thermal and mechanical properties remained similar.     

弹性蛋白酶生物催化酯水解的综合实验设计*

酯的水解是有机化学实验教学中的一个重要化学反应,传统的酯水解实验设计是利用酸性或碱性环境在加热的条件下进行水解,而本实验设计将酯水解与生物催化相结合,利用弹性蛋白酶的水解功能,在常温及中性环境下实现对4-三氟甲基-7-丙酰氧基香豆素的水解。该实验设计创新性地将酯水解和酶催化相结合,有利于拓展学生的知识面,培养化学生物学复合型人才。同时,生物催化反应具有反应温和、环境友好等特点,符合当代绿色化学的需求。     

纳米银改性树脂基托机械性能的初步研究

采用磁控溅射技术在聚甲基丙烯酸甲酯(PMMA)树脂基托表面沉积一层纳米银(Ag NPs)涂层.研究了纳米银改性PMMA树脂基托的机械性能,为改性材料的临床应用提供理论基础.根据国际标准ISO2409:2007描述的划格法对涂层与基底的附着力强度进行测试,各组试件的接触角采用静态液滴法测量,三点弯曲法检测试件的弯曲强度.结果显示,各组涂层与PMMA基底材料结合良好,各组试件的表面润湿性变化不大,其中PMMA-Ag NPs80s组疏水性略有提高,各组试件的弯曲强度均符合国家标准.     

静电纺丝法制备酚醛纤维研究进展

酚醛树脂是一种广泛使用的合成树脂,包括热固性和热塑性两类,具有良好的阻燃性、耐热性和耐腐蚀性。酚醛纤维是由酚醛树脂所制成的交联纤维,传统的酚醛纤维制备方法有熔融纺丝法和湿法纺丝法,后来出现了静电纺丝法。本文根据酚醛树脂的种类分别介绍了热固性、热塑性和热塑/热固混合酚醛树脂三类材料静电纺丝的研究进展。在改善酚醛纤维特性方面,综述了四种优化措施,包括加入无机盐、微波辐射辅助固化、非匀速阶梯式加热固化、氧化石墨烯修饰的静电纺丝法等。此外,对本实验室制备酚醛纤维的研究也进行了概述,阐述了酚醛纤维当前存在的问题及未来发展方向。     

Solid phase synthesis of two muramyl pentapeptide derivatives

Solid phase peptide synthesis (SPPS) of two selected muramyl pentapeptide derivatives is described. The simplicity of removing the protecting groups via one-step deprotection and cleavage from the resin is the biggest advantage of SPPS. Using this method, two muramyl pentapeptide derivatives, D-MurN₃-L-Ala-D-iGlu-L-Lys-D-Ala-D-Ser (5) and D-MurN₃-L-Ala-D-iGlu-L-Lys-D-Ala-D-Ala (6), were obtained. Their chemical structures were confirmed by high-resolution mass spectrometry (HRMS) and nuclear magnetic resonance (NMR) spectroscopy. To determine the absolute configuration of the carbon atom in the side chain of the muramic acid derivative, single-crystal X-ray diffraction measurements were recorded.